Zinc-aluminum-magnesium is a flat carbon steel product coated on both sides with a zinc-aluminum-magnesium alloy applied by continuous hot dip galvanising process.
This chemical composition provide the best results in terms of corrosion resistance.
Zinc-Magnesium (Zn, Al, Mg)
Grades
STEELS FOR COLD FORMING: DRAWING AND PROFILING
DX51D +ZM - DX52D +ZM - DX53D +ZM DX54D +ZM - DX56D +ZM - DX57D +ZM |
STRUCTURAL STEELS
S220GD +ZM - S250GD +ZM - S280GD +ZM S320GD +ZM - S350GD +ZM |
Coating Properties
| Designation | Coating weight | Coating thickness |
|---|---|---|
| EN 10346 | double-sided (g/m2) | (µm per side) |
| ZM 90 | 90 | 7 |
| ZM 120 | 120 | 10 |
| ZM 175 | 175 | 14 |
| ZM 195 | 195 | 16 |
| ZM 250 | 250 | 20 |
| ZM 310 | 310 | 25 |
Dimensions
SLIT COILS – STRIPS IN DIFFERENT WIDTHS AND LOWER WEIGHT
Thickness |
0,30 – 3 mm |
Width |
17 – 2000 mm |
Internal Diameter |
508 or 610 mm |
CUT LENGTHS – SHEETS
Thickness |
0,30 – 3 mm |
Width |
80 – 2000 mm |
Length |
300 – 4500 mm |
Internal Diameter |
508 or 610 mm |
Surface conditions
- Dry
- Standard Oiling
- Chemical passivation
- Phosphatising
Packing
The material may be supplied:
- Without any wrapping
- Wrapped with anticorrosion paper
- Wrapped with anticorrosion paper and metal box
- All sheets will be delivered on pallets.
Surface appearance
(according to international standards)
- Quality A
- Quality B
- Quality C
Tollerance
Thickness, Flatness, Width, Length and Camber tolerances are in accordance with EN 10143.
Fields of application
- Agriculture & Livestock
- Railway Applications
- Road Applications
- Cable Conduits
- Concrete Formwork
- Roofing & Cladding
- Construction Industry
- Vineyard Posts
- Sound Insulation Panels
- Pigpens
- Cold-Formed Sections
- Stables
Please contact us for specifications not shown.
